Showing posts with label Applications in GIS. Show all posts
Showing posts with label Applications in GIS. Show all posts

Sunday, August 2, 2020

Module 5: Hazards - Coastal Flooding

     Living on a barrier island in the midst of hurricane season, this week's lab was particularly fascinating. We used the LAS Dataset to TIN and TIN to Raster tools to create DEM's from LAS files. These DEM's were then run through the Raster Calculator to create a raster file displaying the change in elevation along the New Jersey coast before and after Hurricane Sandy.
     We were then tasked with determining the areas of Cape May county New Jersey that would flood in the event of a two meter tall storm surge. This was done utilizing the Reclassify, Raster to Polygon, and Intersect tools. The percentage of the county that would flood was found with areas determined by calculating the geometry of fields in the attribute tables of the Cape May county and flooded Cape May county layers.
     A little closer to home, we were next required to find the areas of Collier County, Florida that would be inundated by a one meter storm surge. We were working with a USGS DEM and a DEM produced from LiDAR. I found the flooded areas of the county by employing the Reclassify, Region Group, and Raster to Polygon tools. The number of various types of buildings that would be affected by storm surge was found via spatial joins and the Select by Attributes tool. Finally, the Select by Attributes tool was used to find discrepancies between the two DEM's regarding which buildings would be affected.

Sunday, July 26, 2020

Module 4: Crime Analysis




     This week's lab had us conduct crime analyses and create hotspot maps using Grid Overlay, Kernel Density, and Local Moran's I methods of analysis. The resulting maps for each analysis method are depicted above.
     A spatial join was used to combine the 2017 homicides layer with a grid layer for the city. This combined layer was then run through the Select by Attribute tool to select features with a homicide count greater than 0. These selected features were made into their own temporary layer, which was then exported to a permanent layer via the Feature Class to Feature Class tool. The 62 features with the most homicides were selected from the attribute table of this new permanent layer and were exported to their own temporary and then permanent layers in the same manner as mentioned above. A DISSOLVE field was added to this new top 20% layer and was populated with a value of 1 using the Field Calculator. The features were then dissolved to produce the output pictured in the Grid based thematic map above.
     The Kernel Density tool was run on the 2017 homicides data and the symbology of the result layer changed to represent two classes, below and above three times the mean. The values in these classes were then reclassified to have a value of either 1 (less than 3*mean) or 2 (greater than 3*mean). The resulting raster was converted to polygons and the features with a value of 2 were selected and exported to a temporary and then permanent layer in the same process as described for Grid Overlay. The resulting output can be viewed in the Kernel Density map shown above.
     A spatial join was utilized to combine the 2017 homicides and census tracts layers. A crime_rate field with a float data type was added to the attribute table of this combined layer. The field was populated with the number of homicides per 1,000 households using the Field Calculator. The Cluster and Outlier Analysis (Anselin Local Moran's I) tool was run and the features with a COType IDW 8990 value of HH were selected and exported to a temporary and permanent layer via the process described for Grid Overlay. The features in this new layer were dissolved to produce the output displayed in the Local Moran's I map found above.
     The Select by Location tool was used to find how many 2018 homicides resided in the areas predicted by each method. The total area and number of 2018 homicide locations predicted correctly for each method increases from Grid Overlay to Local Moran's I, with the area of Local Moran's I being nearly twice that of Grid Overlay. However, the density of correctly predicted homicides increases from Local Moran's I to Grid Overlay. Kernel Density appears to be the most reliable method, as it correctly predicted a number of homicides close to Local Moran's I and has a crime density close to that of Grid Overlay.

Sunday, July 19, 2020

Module 3: Visibility Analysis

     This week's lab required us to complete a few of the training courses offered on the Esri website. These courses were an excellent resource and instructional material, offering several helpful tips and tools for working with 3D scenes and visibility analyses.
     These tips started with some basic camera and scene controls utilizing the mouse or keyboard/track pad combo. These included zooming in and out on a specific location within the scene, rotating the camera angle around a specific point in the scene, and rotating the scene around the camera position. We also learned how to link a 2D map and 3D scene. This was one of the most fascinating parts of the lab. The courses also instructed us on how to modify the output of a viewshed analysis using fields. We learned that, among others, the range of analysis, angle of analysis, and height of observer/target points could be adjusted utilizing fields in the input datasets' attribute tables.
     The courses required us to implement a few new tools for our analyses. The Construct Sight Lines tool was used to create lines of sight between observer points and a feature (parade route), the Line of Sight tool was used to determine visibility along the sight lines created by the Construct Sight Lines tool, and the Viewshed tool was used to find how much of an area was visible from (illuminated by) the observer points (streetlights). The scenarios presented in the lessons brought the concepts to life in a way that made for an easier and more engaging learning experience. The possibilities for applying these visibility analyses and tools to the real world are immense and exciting to consider.

Monday, July 13, 2020

Module 2: LiDAR



     This week we explored LiDAR and how to use it to create vegetation height rasters and canopy density maps. We utilized the LAS Dataset to Raster tool, the Minus tool, LAS to Multipoint, and Point to Raster tool to create various intermediary datasets concerning height and digital surface modeling. We also used the Count, IS NULL, and Con tools to manipulate these datasets. The adjusted datasets were run through the Plus tool and the density was determined with the Divide tool. We also created a chart of the vegetation heights. The outputs for vegetation height and density, as well as digital surface modeling, can be seen above.

Thursday, July 9, 2020

Module 1B: Least-Cost and Corridor Analysis


     Part of the lab this week was to conduct a least-cost analysis and develop a map showing the preferred corridors for movement of black bear between two areas of a national forest. I used the Euclidian Distance tool in ArcGIS Pro to create a distance to roads raster. I then assigned suitability ratings to the distance to roads, elevation, and land cover rasters using Pro's Reclassify tool. These reclassified rasters were then combined using the Weighted Overlay tool. The resulting raster was used in conjuction with the Raster Calculator to create a cost raster, which was used to produce two cost distance rasters. The Corridor tool was applied to the cost distance rasters to find the least cost corridors. There was only one least corridor; however, there were a few others that were still viable. These corridors can be viewed in the map pictured above with symbology indicating the most, less, and least ideal options.

Tuesday, July 7, 2020

Module 1A: Suitability Analysis


     As part of our lab this week, we were required to create two suitability rate rasters and compare them. The resulting rasters are depicted in the above map layout. To create these rasters, I used the Slope tool in ArcGIS Pro to create a slope raster from a DEM. I also used the Polygon to Raster tool to create a soils raster. The Euclidian Distance tool was also employed to create two rasters, a distance to rivers and distance to roads. I then used the Reclassify tool to reclassify these four rasters and a land cover raster into suitability ratings. Finally, the Weighted Overlay tool was used to produce the two rasters in the map layout above. The settings for the Weighted Overlay tool were changed so that the five rasters were of equal weight in one scenario and of varying weights in the other.
     The equal weight scenario resulted in much fewer least and most suitable (2 &5) locations than the alternative, while also having more 4 rated and slightly less 3 rated locations.

Saturday, July 4, 2020

Introduction


     My name is Jacob McElroy. I work part time as a Service Coordinator at Discount Tire in South Daytona, Florida. I have a bachelor's degree in Environmental Biology from the University of South Florida and am currently pursuing a M.S. in GIS Administration from the University of West Florida. I discovered GIS during my undergraduate studies and was immediately drawn to it. I have loved geography and maps since I was a child and was excited that I might be able to use them to aid in my studies of the environment. I applied to UWF both for this reason and to diversify my resume. I hope to use my degrees to work for the National Parks Service or in the private  sector. The above link is for a story map that tours my hometown and provides a little more information about my experiences growing up.